Expertise

Browse our expertise by

CASE STUDY

The roller coaster

A design challenge combining excitement and rigour

A fascinating article on the origin, history, and evolution of roller coasters from their earliest prototypes in Russia in the 16th century on the banks of the Neva River of St. Petersburg, and then dives into detail on how numerical simulation of roller coasters works to ensure their success both as entertainment and from a safety perspective for users and operators.

mechanics civil-engineering construction optimization

CASE STUDY

A design study of a centrifuge for separating water and plastic

This paper presents the preliminary simulation study of a typical centrifuge currently produced by Gamma Meccanica. The objective of this study is to evaluate the behaviour of the centrifuge using moving particle simulation and discrete element method (MPS-DEM) simulation techniques with Particleworks 7.2.1 to gain a better understanding of phenomena that are impossible to monitor experimentally.

mechanics particleworks

CASE STUDY

Face to face with Pietro Del Negro Senior CAE engineer at Ricardo

How Ricardo predicts the life of motorcycle components

In this article, Del Negro explains how Ricardo is developing solutions to support its customers to predict the lifecycle of motorcycle components, using finite element analysis (FEA) and fatigue analysis.

femfat mechanics automotive

CASE STUDY

Exploring multi-resolution particle CFD methods

Particle-based CFD (computational fluid dynamics) methods have become very popular in recent years due to the simplicity of the model configuration process and the ability to solve free surface problems such as splashing.

automotive particleworks

CASE STUDY

Using CFD simulation to optimize the ventilation system of a spray booth

Overspray is a key problem in the paint application process. This phenomenon is caused by inefficiencies of the robots inside the spray booth and can best be solved by balancing the air flow properly in the paint application area.

automotive ansys cfd

CASE STUDY

Earthquake evaluation of a stacker crane deployed in the Mexican Republic

The intralogistics sector uses stacker cranes to transport stacked pallets between racks

Stacker cranes handle pallet placement in the warehouse, moving longitudinally along the aisles between the warehouse shelves to deposit and retrieve loads. Stacker cranes are susceptible to earthquakes that can damage them and the racks around them.

mechanics civil-engineering

CASE STUDY

The growing importance of numerical simulation in the nautical sector

Face to face with Ignazio Maria Viola and Ubaldo Cella

It is widely recognized that computer-aided engineering (CAE) has been playing an increasingly significant role in the marine industry in recent years. On the other hand, not many know that mesh morphing is an essential technology that can greatly improve computer simulation.

marine rbf-morph

CASE STUDY

From saving energy to creating energy

Use pumps as turbines to generate low-cost electricity from existing piping systems

This article describes how SAER ELETTROPOMPE used Ansys CFX to transform "standard" pumps into pumps to be used as turbines.

energy ansys cfd

CASE STUDY

A perspective on simulation in the automotive industry

Face to face with Paul Stewart, design process leader and consultant

Futurities interviewed Paul Stewart about his thoughts on the evolution of simulation’s role in the design process in the automotive industry, the evolving roles of CAD and CAE and the move to freeform deformation in automotive design, as well as the likely impact and role of artificial intelligence technologies in this space.

automotive

CASE STUDY

ISEO adopts Cetol 6σ for a global approach to dimensional management

Technical collaboration and support from EnginSoft key to achieving maximum benefit from the solution

This case study describes ISEO’s project to introduce a global dimensional management approach based on CETOL6σ that starts from the product concept phase and includes design development and prototyping and extends on to cover all other phases of production through to the finished product, with the guidance and support of EnginSoft.

tolerances cetol mechanics

CASE STUDY

Optimizing an offshore wind turbine monopile for hurricane-prone regions

This technical article describes a project led by BLOM Maritime under the auspices of the HS-03 SNAME (the Society of Naval Architects and Maritime Engineers) panel in which ESTECO’s modeFRONTIER process automation and design optimization software was used to optimize the design of a monopile for a 15MW turbine to survive hurricane conditions.

modefrontier energy

CASE STUDY

Optimization of a brush cutter using knowledge-based engineering

This article describes how the company created and tested a process to construct a parametric CAD model capable of providing its designers with a starting point for any new machine to be designed.

mechanics ansys modefrontier maplesim maple

CASE STUDY

Comparing finite volume and particle CFD simulation methods for understanding lubrication in automotive transmissions and axles

Understanding the flow of oil lubrication in transmissions and axles is vital to improving their efficiency and reducing the wear of key components. The choice, and volume of lubricant, and the shape of the gearbox housing can all be optimized for the expected gear speeds, loads, and temperatures.

automotive particleworks

CASE STUDY

Designing Versatile and Athletic Robots with CAE

This article presents an example of a proposed design optimization approach with a case study.

biomechanics modefrontier

CASE STUDY

Analysis of the thermo-fluid dynamics of a paint shop’s hot water distribution network

This article describes an analysis of the performance of a hot water distribution piping network consisting of a main boiler and various utilities inside an automotive paint shop based in France. The simulation is performed using Flownex, a CFD (computational fluid dynamics) software with concentrated parameters.

automotive flownex

CASE STUDY

Strategy to optimize the independent suspension system of an off-highway, agricultural tractor

The purpose of the case study was to implement a design methodology that used multi-disciplinary simulation and an automated process to analyse thousands of product configurations and highlight vehicle performance distributions in terms of handling, comfort, and cost. This approach ensures that the best solution is always selected.

mechanics modefrontier automotive optimization

CASE STUDY

Preliminary thermo-mechanical design, simulation and optimization of LAD on board the eXTP space mission

This article describes the preliminary study resulting in the design solutions adopted for the LAD module’s most important thermo-mechanical drivers, which were developed and used to demonstrate compliance with the system requirements at the spacecraft level.

aerospace rbf-morph ansys

CASE STUDY

Optimizing the shape of the M10 engine’s injector head methane circuit using RBF mesh morphing

This article is based on a collaboration between RBF Morph and AVIO to configure a numerical optimization procedure to improve the Vega E M10 engine’s performance by optimizing the methane circuit of the injector head.

aerospace rbf-morph ansys meshing

CASE STUDY

Optimization of water spray parameters by 3D CFD particle simulation for an automotive anti-aquaplaning system

In this paper, we discuss the digital modelling and simulation of the EASYRAIN Aquaplaning Intelligent Solution (AIS) using mesh-free moving particle simulation (MPS).

automotive particleworks

CASE STUDY

Comparing cooling methods for e-motors

A simulation methodology developed by TotalEnergies

In this paper, we will present the methodology developed by TotalEnergies and EnginSoft to select, design and improve an e-motor by simulating and predicting electromagnetic losses, fluid flow behaviour and temperature distributions.

automotive electronics particleworks

CASE STUDY

Calibration of the Johnson-Cook plasticity for high strain rate regime applications

Material models used in structural finite element analysis (FEA) are often one of the key aspects that engineers need to describe very accurately.

optimization modefrontier ls-dyna

CASE STUDY

Optimizing the spray cooling of e-drives with moving particle simulation

This article discusses the use of moving particle simulation of the oil distribution system to predict heat dissipation and temperature distribution in the engine in order to examine virtual e-drive prototypes to improve their final design.

particleworks automotive

CASE STUDY

Creating new services based on reconstruction of accident kinematics with FEM prototypes and a design thinking approach

This article combines the use of the finite element method with a Design Thinking approach to reconstruct a road traffic accident for an traffic accident insurance report in order to analyse the outcome of the accident, compare the respective property damage, and the physical injuries to pedestrians or passengers in order to limit the quantity of large claims compensation for the insurance company, while ensuring the fairness of the compensation for the customer to foster greater trust and credibility in the insurance provider.

automotive ls-dyna

CASE STUDY

Whirlpool uses simulation to investigate improvements to vacuum cleaner performance

Simulation studies help Whirlpool identify the most useful design modifications to support its product objectives

This article describes how EnginSoft applied a Computational Fluid Dynamics (CFD) analysis, on behalf of Whirlpool EMEA, to simulate three different geometrical design modifications to the vacuum cleaner head to improve on a baseline performance that was modelled first.

appliances cfd ansys

CASE STUDY

CFD simulation of an axial piston pump with Ansys CFX

This work presents the CFD model of an axial piston pump and compares it to a validated 0D model. The main objective of this study was to analyze the flow field inside the pump, focusing on the aspects that involved the main inner volumes, such as the filling and emptying dynamics in the piston chambers and the flow field inside the ducts.

ansys cfd energy

CASE STUDY

Using high-fidelity FSI simulation and advanced mesh morphing to simulate and mitigate vortex-induced Vibrations

This study discusses the complex and challenging problem of controlling vortex-induced vibrations (VIV).

cfd mechanics ansys rbf-morph

CASE STUDY

Large bore engine lubrication system: oil flow and pressure analysis using moving particle simulation

In this study, the focus was on the oil supply system for the big-end-bearings of an 18-cylinder engine, which is one of the largest four-stroke gas engines in existence, ideal for base load applications. Wärtsilä and EnginSoft created a moving-particle simulation model, a meshless method of solving Navier-Stokes equations, which allows complex geometries with moving parts to be simulated.

marine particleworks

CASE STUDY

Loaded tooth contact analysis and dynamic investigation of Spiral Bevel

Spiral bevel gear pairs (SBGs) play an important role in transferring power between non-parallel shafts in transmission systems. This paper presents the dynamic results of the case study investigated and illustrates nonlinear phenomena.

masta mechanics

CASE STUDY

Comparative analysis of temperature control systems for high pressure die casting dies

Numerical methods for the thermal analysis of the HPDC process are needed to shorten the cost, the design and production time and the samples to involve in finding acceptable operating conditions.

In High Pressure Die Casting production it is necessary to keep the die temperature within a certain specified range

die-casting magma metal-process-simulation

CASE STUDY

Comparison of casting simulation results and experimental data in heavy section ductile iron production

Aims to provide accurate information on cooling curves, microstructures and mechanical properties of large items for generic commercial uses

This technical article discusses a comparison study of simulated results and experimental data on the cooling curves, the microstructure and the mechanical properties inside a general commercial ductile iron casting.

die-casting metal-process-simulation magma

CASE STUDY

New Ferry boat: Emax 2 circuit breaker tolerance analysis for maximum efficiency in panelbuilding

EnginSoft engineers help ABB optimize the Emax 2 design to allow ABB’s client IMESA to create a highly compact switchgear column for a state-of-the-art ferryboat

In this technical case study, we illustrate how EnginSoft engineers helped ABB to optimize the design of the Emax2 project.

tolerances cetol electronics mechanics eztol

CASE STUDY

Gravity Die Casting of Motorcycle Components

A permanent mold casting study of the mold design and mold-casting process of an aluminum alloy single-sided-swing-arm

The advent of the Naked Motorcycle has changed the way we look at motorcycle parts: they now also need to be aesthetically pleasing because they are mostly visible to the naked eye.

automotive magma metal-process-simulation rail-transport

CASE STUDY

Innovative and Integrated Technologies for the Development of Aeronautical Components

A more efficient simulation procedure for the design phase of Al-Si alloy components for the aeronautical industry.

The scope of this study was to determine and validate a more efficient simulation procedure for the design phase of Al-Si alloy components for the aeronautical industry.

aerospace magma metal process simulation

CASE STUDY

Validation of a model of a methanol fuel supply system for a two-stroke dual-fuel marine diesel engine

In this study, Alfa Laval and EnginSoft present the results of a simulation of the methanol fuel supply system currently used on a methanol carrier.

marine flownex

CASE STUDY

New solution for cost-effective electromagnetic analysis

EnginSoft’s contribution recognized in the F4E Technology Transfer Program

EnginSoft’s cost-effective solution was successfully created in collaboration with F4E’s expert teams after numerous years spent developing and testing tools, algorithms and customized interfaces in each phase of the Electromagnetic FEM analysis workflow.

energy ansys electronics

CASE STUDY

Reshaping the DEMO Tokamak’s TF Coil with high fidelity Multiphysics CAE and advanced mesh morphing

This article describes the Multiphysics optimization procedure undertaken to ensure the best compromise between electromagnetic and structural compliance for the Toroidal Field coils of the Advanced Divertor Configurations of the toroidal chamber, that holds the plasma in which the fusion reaction takes place.

energy ansys rbf-morph

CASE STUDY

Analyzing the process of filling a flexible pouch by coupling multi-flexible-body dynamics and particle-based CFD simulation

Investigating the effects of the parameters to select the optimal machine configuration

Packaging companies are always striving to stay one step ahead of their competitors in providing the best solutions for product capacity.

consumer-goods food-beverage recurdyn particleworks

CASE STUDY

Pipistrel: flying straight from simulation to production

ESTECO optimization technology as a way to skip the prototyping phase for a hybrid-electric aircraft propeller

Pipistrel, an aviation and aerospace company based in Slovenia, chose ESTECO technologies to design the propeller for a highly efficient, hybrid-electric aircraft.

aerospace modefrontier

CASE STUDY

Application of Particleworks to the design and performance evaluation of waterproofing for automotive air conditioning systems

This article introduces a case study on the waterproofing of an automotive air conditioning system for rainy conditions using Particleworks, a particle method CFD software.

particleworks automotive

CASE STUDY

Analysis of the behavioral characteristics of detergent powder using Rocky-Ansys Fluent two-way coupling

This analysis attempts to understand the behavior of sticky detergent powders according to flow velocity using Rocky-Ansys Fluent two-way coupling.

consumer-goods rocky ansys

CASE STUDY

American Magic perfects AC75 design for the 36th America’s Cup

ESTECO technology plays a key role in foil and sail design

The America’s Cup isn’t just the first sailing competition in history, it’s also the first when it comes to innovation. Learn how American Magic engineers partnered with ESTECO to prepare for their next challenge

modefrontier marine

CASE STUDY

Lubrication and heat dissipation in transmissions and bearings

Lubrication and heat dissipation in transmissions and bearings are critical to both the performance and the life of these systems

Transmission design is mainly based on the mechanical aspects of the transmission and lubrication is an aspect that is verified, and eventually corrected, based on bench testing, i.e. once the design phase has been completed and a physical prototype is available.

mechanics particleworks automotive

CASE STUDY

Aero packs in good shape with advanced mesh morphing

How the synergy between Adjoint Methods and RBF Morph can efficiently boost Dallara Automobili’s aerodynamic design process

This article describes a new method of aerodynamic design, the result of a collaboration between Dallara Automobili and RBF Morph, that uses adjoint methods and mesh morphing to create an innovative solution to accelerate the optimization process, reducing both time and costs.

automotive rbf-morph

CASE STUDY

Optimally designing an artificial lung for extracorporeal life support

A CFD-based approach

The study described in this article was designed to obtain greater insight into the gas transfer mechanism at microscopic scale using computational fluid dynamics in order to accelerate design exploration to find the optimal solution.

biomechanics ansys

CASE STUDY

Simulating fire extinguishing equipment for historical buildings with Particleworks and Granuleworks

Studies of three methods: a water discharge gun, a drencher, and a firefighting drone

This article presents simulation examples for three types of firefighting equipment for cultural heritage buildings using Particleworks, a CFD software based on the Moving Particle Simulation (MPS) method: a water discharge gun, a drencher, and a firefighting drone.

particleworks civil-engineering

CASE STUDY

Using Simulation and Modeling for medical Radio Frequency design

A study demonstrating the benefits of simulation over prototyping

The growth of technology and end-user expectations is ever more important in many application areas and medical devices are at the forefront of this innovation process.

ansys electronics

CASE STUDY

Powering the next generation of off-highway suspension design

Design process integration of an independent suspension axle for off-highway vehicles

This study presents the work undertaken by Dana Incorporated to develop a new independent suspension axle for an off-highway vehicle (OHV). This multi-disciplinary simulation activity combines improvements to the kinematic and dynamic performance of the suspension while also examining the constraints of the mechanical design and the hydraulic system, as well as the cost of the suspension.

modefrontier automotive

CASE STUDY

Ku-band filter design for high power space applications using Ansys simulators

This paper presents the design and first experimental results of a very compact Ku-band bandpass filter for high power satellite applications. The filter was designed and simulated using the Ansys HFSS and Mechanical simulators. Proposed as part of an ESA ARTES Advanced Technology project, the filter is based on dielectric loaded combline resonators.

ansys electronics aerospace

CASE STUDY

Churning loss within a calender roll of a paper machine

Using Particleworks to investigate the churning loss in terms of the torque caused by the oil-piston interaction within a calender roll of a paper machine

Performing flow simulations to investigate the complex loss mechanisms caused by the interaction of the rotating oil ring within a piston in the inside of the roll of a calender, which is an important device of a paper machine. Hereby, the trends of the churning losses are determined for design improvement conducted by Voith Paper R&D.

particleworks mechanics

CASE STUDY

A natural remedy for hot-spot stresses

Using advanced mesh morphing to seamlessly perform bio-inspired structural shape optimization

This paper demonstrates how the biological growth method, studied by Mattheck in the 1990s, can be easily implemented for structural shape optimization finite element method (FEM) analyses using advanced radial basis functions (RBF) mesh morphing.

ansys biomechanics rbf-morph

CASE STUDY

Rainfall test simulation of an air conditioner’s outdoor unit using Particleworks

This article presents the simulation of rainfall on the outdoor unit of an air conditioner as a concrete example of this approach.

appliances particleworks

CASE STUDY

Optimizing the performance of antennas installed on avionics platforms

Rapid and accurate evaluation of platform impact on antenna radiating characteristics is vital

This article discusses the use of the Ansys HFSS SBR+ method for wave propagation analysis that is based on specific EM propagation formulations (commonly referred to as Asymptotic Methods), and which offers an effective alternative in terms of solution accuracy and computational cost. The method’s effectiveness is demonstrated in this case study that considers the analysis of an ESM sinuous antenna installed on an avionics platform.

ansys electronics

CASE STUDY

Numerical applications of an Ansys-based tool to analyze hybrid metal/composite lattice structures

Computationally efficient method enables design and optimization processes of axial-symmetric lattice structures to be conducted simply and quickly

This paper, by means of presenting three application cases, provides a brief description of the capabilities of a numerical tool developed for the design and optimization of hybrid metal/composite lattice structures created with 3D printing

ansys composites

CASE STUDY

Multiphase fluid dynamics simulation of electric expansion valves for refrigeration and air conditioning applications

Evaluating the ability of numerical methods to replace experimental testing to calculate the capacities of expansion valves

This article details a study that was undertaken by Castel, a producer of refrigeration and air conditioning components, to compare the results of an experimental method for testing expansion valves with a numerical method using Ansys.

ansys energy

CASE STUDY

Optimizing the cable routing for a hyper-redundant inspection robot for harsh, hazardous environments

A multi-objective optimization framework to reduce the actuation loads and increase the payload

This article discusses a multi-objective optimization study to determine the optimal matrix for the routing of the actuating cable system in order to minimize the cable load on the robot and maximize the robot’s payload.

optimization modefrontier mechanics electronics

CASE STUDY

Development and optimization of crash brackets for ECE R29 regulation compliance

IVECO uses modeFRONTIER to simulate results to pass type-approval tests

This paper presents the main steps taken in the development phase of the IVECO cab suspension brackets to comply with the new ECE R29 crash regulation for Heavy Commercial Vehicles (HVC).

modefrontier optimization automotive

CASE STUDY

Simulating the multiphysics of a residual current device

Ensuring the safety of users around electrical contacts

This article examines the simulation of an RCD to determine the factors that affect its response times.

appliances ansys cetol recurdyn tolerances

CASE STUDY

Numerical analyses of the heat transfer processes of a key cooling system in the ITER reactor

Supporting the design of a critical system with realistic numerical simulations of heat radiation and conjugate heat transfer

The ITER reactor’s electron cyclotron heating and current drive (EC H&CD) system launcher requires an effective cooling system due to the strong thermal loads it supports. In supporting the design of this cooling system, NINE performed several numerical studies using the Ansys simulation tools

ansys energy

CASE STUDY

Improved blast furnace performance with material load optimization

Combining modeFRONTIER with Rocky DEM to design a better deflector saves up to 130 hours of computation time

The Arvedi Group approached the University of Trieste to find a solution to the uneven distribution of material inside the hopper of their blast furnace in Trieste, Italy.

optimization modefrontier rocky mechanics

CASE STUDY

Treating residual stresses and deformations in die castings

Virtual simulation during product and process design improves time to market and cost efficiency

This technical article illustrates the advantages of using virtual simulation to evaluate the thermal processes of die casting to reduce the formation of residual stresses and deformations in the components produced.

metal-process-simulation mechanics magma

CASE STUDY

Optimization techniques applied to centrifugal compressor design

Using RSM to save design time and speed time-to-market

Optimization tools, and specifically response surface methods (RSM), can be adapted very well in the design process to provide information around the design of a compressor stage. This article will cover two of the possible optimization uses: the search of optimum performance and data generation.

modefrontier optimization mechanics

CASE STUDY

Filling and compression analysis of metallic powders composed of spherical particles

The efficiency of material design can be greatly improved by using FEM-based virtual material testing analysis

This article presents an example of the analysis of a powder composed of spherical particles. Since powders have a very fine heterogeneous structure, a multi-scale approach based on homogenization analysis is proposed.

multiscale ansys mechanics

CASE STUDY

Using CFD Analysis to predict the effect of Wind on a Tower Crane

CFD proves to offer a reliable working methodology for designers

This article proposes the use of computational fluid dynamics (CFD) to address these complexities.

ansys mechanics

CASE STUDY

ME Elecmetal harnesses power of Rocky DEM to improve crusher liner performance

ME Elecmetal — a global supplier of integrated wear solutions for mining, construction and industry — is among the first companies to benefit from Rocky DEM’s latest technology: the Tavares breakage model.

civil-engineering rocky

CASE STUDY

Predicting the strength of composite materials using Ansys Software

Applicable from material design to product design

This technical article discusses some of the problems of using finite element method (FEM) simulation software for composite material analysis and introduces new solutions from CYBERNET with Ansys Software for solving these problems.

composites ansys multiscale

CASE STUDY

Improving the efficiency of an electric arc furnace’s canopy hood

This technical article describes a numerical (transient computational fluid dynamics) simulation applied to study the suction efficiency of a canopy hood in a steel plant’s electric arc furnace with a view to increasing it.

ansys energy

CASE STUDY

Tools and methodologies for generating digital twins in medical research

An overview of the latest advances of the use of CAE technologies in the medical field

This article provides a non-exhaustive overview of some of the latest advances in the adoption of CAE technologies in the medical field by citing some ongoing EU research programs.

rbf-morph biomechanics

CASE STUDY

New process to analyze vibrational fatigue of solder joints on printed circuit boards used in electric vehicles

High degree of automation allows assessment of massive number of solder joints and electronic components

This technical article presents a simulation process to analyze fatigue in electronic parts, particularly in solder joints, on printed circuit boards (PCBs).

femfat electronics automotive

CASE STUDY

Testing ParticleWorks coupled with RecurDyn to simulate water behavior in water technology products

LIXIL is trying to introduce Particleworks, a meshless multiparticle simulation (MPS) computational fluid dynamics (CFD) tool in the research and development of these products.

recurdyn particleworks appliances

CASE STUDY

Optimization of the SLM/DMLS process to manufacture an aerodynamic Formula 1 part

This paper presents the RENAULT F1 Team’s AM process for an aerodynamic insert in titanium Ti6Al4V. Production was optimized by identifying the best orientation for the parts and the best positioning for the support structures in the melting chamber, in addition to using the ANSYS Additive Print module, a simulation software useful for predicting the distortion of a part and for developing a new, 3D, compensated model that guarantees the best “as-built” quality.

automotive additive-manufacturing optimization

CASE STUDY

Getting bounced: Investigating the loads and durability of a Pogo Stick

A light-hearted coronavirus lockdown project with a useful outcome

This light-hearted technical article discusses a project undertaken between WolfStar Technologies’ Tim Hunter and Endurica’s Will Mars during the Coronavirus lockdown – to create a digital twin of a Pogo Stick in order to calculate its fatigue damage in the hands of a novice user.

sports endurica

CASE STUDY

Conduct fatigue checks directly in Ansys Mechanical using SDC Verifier

Template-based design automates future routine work, and automated documentation facilitates report generation

A lot of steel structures such as cranes, heavy machinery and other equipment subjected to repetitive loading is highly likely to develop cracks or failures because of the fatigue damage.

civil-engineering ansys sdc-verifier

CASE STUDY

CFX Berlin’s TwinMesh enables standardized design for new rotary lobe pumps

CFD analysis improves performance, durability and service life of pumps for Vogelsang GmbH & Co. KG

Rotary lobe pumps are the most reliable pumps in agriculture but, like all other technical equipment, they have to be optimized and constantly redesigned to continue competing in the market.

turbomachinery twinmesh

CASE STUDY

Introducing Skippy: an athletic monopedal robot, designed for a repertoire of behaviors

Demonstrating the effectiveness of a systematic, complete design approach to achieve extreme, unprecedented behaviors

This article discusses a realistic multi-objective parameter optimization study of a highly athletic one-legged robot, called Skippy, in which both the parameters of the mechanism and the parameters of its optimal behaviors were sought.

optimization modefrontier biomechanics

CASE STUDY

CFD study of a Pelton turbine runner

Comparison between traditional Eulerian and novel Lagrangian approaches

This technical article, a collaboration between EnginSoft and ZECO, compares two different methodologies for the study and optimization of impulse turbines, specifically Pelton turbines, in order to evaluate which is the quicker and more reliable method.

cfd particleworks energy

CASE STUDY

The impact of numerical analysis on the efficiency of cooker hood ventilation systems

Minimizes trial and error activities and costs and improves right-first-time results

This technical article describes how CFD analysis minimizes trial and error activities and costs and improves RFT – “right first time” – results.

consumer-goods cfd furniture ansys

CASE STUDY

A method to conduct dynamic analyses of floating solar structures using AQWA

Structural analysis method also considers response characteristics over time

This technical paper presents an analysis process to accurately examine the environmental loads and structural stability of a Floating photovoltaic (PV) power plant. The method includes a hydrodynamic analysis of the Floating PV in its water-based environment as well as a structural analysis of its structural stability based on the characteristics of motion it undergoes.

ansys energy

CASE STUDY

CFD study to optimize the cooling performance of a narrow specialty tractor

Numerical modelling reveals design strengths and weaknesses prior to prototype testing, saving time and money

In this technical article, a CFD study of various designs for four different specialty tractors: two brands of specialty tractors for vineyard configurations, and two brands of specialty tractors for orchard configurations, are described.

automotive ansys cfd

CASE STUDY

A CFD simulation of melting furnace for the production of stone wool

Simulation provides substantial information about the melter’s operating conditions

Gamma Meccanica’s R&D department is constantly researching new solutions to improve the overall performance of equipment, production capacity and reliability while developing environmentally sustainable processes and applications to benefit its customers.

cfd mechanics ansys

CASE STUDY

Using CAE simulation to verify the structural safety and performance of a two-wheeler’s driving mechanism

Coupled simulation methods enables more accurate evaluation

In this article, we describe how Piaggio used computer-assisted engineering simulation to evaluate the structural safety, performance and dynamic behavior of the driving mechanism of a two-wheeled vehicle under both normal and spurious operating conditions, specifically static and fast dynamic conditions.

automotive multibody

CASE STUDY

Industrial Sheet Metal Processing Company

Salvagnini chooses RecurDyn for multibody analyses

Salvagnini is a reference in applying intelligence to sheet metal working and has selected RecurDyn software for its multibody analysis requirements, becoming the 500th commercial customer of FunctionBay Inc.

multibody recurdyn

CASE STUDY

Acoustic assessment of an electric water pump using Ansys Workbench and Multiphysics simulation

Feasibility study of a complete acoustic workflow

This technical article describes an acoustic emissions study conducted on an electric water circulation pump used for supplementary cooling or heating functions in vehicles, by the Modeling & Simulation Pumps Department of Pierburg Pump Technology

acoustic ansys mechanics

CASE STUDY

Lattice optimization with GENESIS and GSAM

New capability accelerates analysis time and enables determination of optimal lattice dimensions

With GENESIS or GSAM optimization tools, you can maximize additive manufacturing’s potential.

additive-manufacturing gtam-gsam ansys

CASE STUDY

Digitizing a process to standardize the analysis and evaluation of windshield wiper performance

TAE SUNG collaborates with DY Auto to develop dedicated software

This technical article describes a project that was undertaken by TAE SUNG Software and Engineering, in collaboration with DY AUTO in Korea, to establish a computerized process to conduct three-dimensional real-scale analysis of any of the three types of windshield wiper currently in use, and to establish a specific standard for evaluating wiper performance.

automotive ls-dyna ansys

CASE STUDY

Refining the design of a spout for a laundry detergent

Particleworks enables fluid flow simulation combined with human-like behavior to improve product performance

In this case study, LION Corporation uses Particleworks to simulate fluid flow to improve the design of a new cap spout for its new HARETA brand of laundry detergent.

particleworks cfd consumer-goods mechanics

CASE STUDY

Tolerances analysis on a nitrogen spring

EnginSoft models technical product modifications to enable Special Springs to satisfy a customer request at the minimum cost

Special Springs commissioned EnginSoft’s engineers to calculate the production cost repercussions of a technical product modification requested by an important customer.

eztol mechanics cetol tolerances

CASE STUDY

Taking stock: the evolution of simulation around the world pre- and post-Covid-19

From its earliest days through to future post-pandemic perspectives

At this particular moment in time, this article wishes to reflect on the evolution of CAE and simulation in an effort to present a big-picture view when most of us are daily dealing with all the devil in the details in every aspect of our lives. We approached some long-standing business friends in engineering simulation from various regions around the world to help us in this task

ansys industry4 news

CASE STUDY

SACMI designs optimized next-generation components using automated surface sculpting

Uses Adjoint and BGM shape-modification approaches for mesh morphing

Mesh morphing has proven to be a valuable tool in parametrizing numerical models to perform shape optimization. It allows engineers to save time in generating new configurations for analysis because it does not require geometry modification and mesh re-generation.

ansys mechanics

CASE STUDY

Improving a coffee capsule machine’s capacity and performance using multibody simulation

Improvements achieved by optimizing laws of motion governing machine components

This technical article describes a project undertaken by OPEM to optimize and validate the laws of motion governing the moving operations of a machine that produces coffee capsules, namely the cut and weld unit, the film feeder, the conveyor and the support structure.

consumer-goods multibody recurdyn food-beverage mechanics

CASE STUDY

Using multidisciplinary optimization for engine suspension stiffness

Optimizing idling and ride comfort

In this technical article, Fiat Chrysler Automobiles explain how they created a multibody optimization project to identify the optimal values for the powertrain suspension stiffness for a three-cylinder engine in order to minimize the vibrations at idle condition and ensuring greater ride comfort to the passengers.

automotive optimization modefrontier

CASE STUDY

The brave new world of virtual commissioning

Current market demands require new approaches to assure business imperatives are achieved

The following article explains how this new approach to the design of automated machines can enable industrial automation OEMs and system integrators to achieve these business imperatives with the assistance of industrialPhysics simulation software.

mechanics iphysics industry4

CASE STUDY

Two-step approach to numerical simulation of fire and smoke propagation

Early stage use in design aids fire protection assessment of buildings and evacuation routes faster and more cost effectively

This article explains how the simulation of a severe fire in a warehouse that had caused substantial damage was undertaken. It explores the use of the fire dynamics simulator (FDS) code, developed by the US National Institute of Standards and Technology (NIST)

civil-engineering

CASE STUDY

Using simulation and validation to build trust in new tools

A multibody simulation of a switch disconnector

This article describes the multibody simulation of a switch disconnector and its validation with experimental tests, undertaken by LOVATO Electric for the purpose of conducting a detailed evaluation of a potential new tool to design the mechanical part of its electrical devices.

recurdyn multibody electronics

CASE STUDY

Electrifying Solutions for Motors and Generators

Marelli Motori engineers use Ansys multiphysics solutions to custom-design motors and generators to solve challenges in hydropower, cogeneration, oil and gas, civil and commercial marine transport, military applications, and ATEX applications involving motors and generators in explosive atmospheres, among other applications.

automotive ansys energy

CASE STUDY

The design optimization of a small axial turbine with millions of configurations

The case for computerized optimization over manual design interventions

In this article, we show that the main turbine characteristics, such as efficiency and exit flow angle, can be sufficiently improved using parametric optimization.

modefrontier energy optimization

CASE STUDY

Intermarine Shipyard tests Flownex SE for its naval piping systems

Software found to save time in the design phase

This technical article describes a comparative study that was undertaken by Intermarine, with the assistance of EnginSoft, between using the Flownex simulation environment and Intermarine’s manual or classic methods (both of which were compared with actual field data from on-board measurements) to predict pressure losses in the various piping systems that convey fluids on board a vessel.

marine energy oil-gas flownex

CASE STUDY

Forklift Dynamics

The forklift’s wheels were represented in detail to implement a sophisticated model of the tire features

A client wanted to evaluate the dynamic performance of a new-concept forklift, so a fully-functional multibody model of the forklift was built by assembling the client’s CAD geometries.

multibody automotive mechanics recurdyn

CASE STUDY

New approach for accurate, robust morphing of CAD geometries

Facilitates bi-di transfer between analysis-testmanufacture and design

This technical article describes a new, automated approach to accurately and robustly morph CAD geometry based on results of analysis in order to facilitate the missing bi-directional transfer of these geometries between analysis/test/manufacture and design. Two industrial examples using this approach are also provided, in the morphing of a turbine blade deformation model and aero-elastic deformation of aerodynamic shapes for the NASA Common Research Model.

aerospace

CASE STUDY

Optimizing a cam mechanism using Adam and MATLAB

The design of a cam for high-speed production machines with various operating criteria imposes various conflicting objectives

This technical case study explains the application of a two-step methodology using the MATLAB and Adam algorithms in the modeFRONTIER software platform.

optimization modefrontier automotive

CASE STUDY

Creating an accurate digital twin of a human user for realistic modeling and simulation

Multibody system simulation using biomechanical human body models in RecurDyn

This technical article describes a human body model (HBM) wizard developed for RecurDyn and discusses what is already possible and what is in the development pipeline for the near future. Biomotion Solutions provides software to quickly build HBMs in industrial-grade simulation packages.

multibody recurdyn industry4 biomechanics